SINGER SE340 LEGACY Instruction Manual
42
E
MBROIDERY
P
REPARATION
ATTACHING THE EMBROIDERY FOOT
CONNECTING THE EMBROIDERY UNIT
7KHUHLVDFRYHUHGVRFNHW$EHKLQGWKHPDFKLQH7KHFRYHU
will open automatically when connecting the embroidery unit.
1. Turn the machine off before connecting the embroidery unit.
6OLGHWKHHPEURLGHU\XQLWRQWRWKHDUPRIWKHPDFKLQHXQWLO
LWSOXJV¿UPO\LQWRWKHVRFNHW
3. If needed, use the level adjusting feet so that the machine
and embroidery unit are even with one another.
T
O
R
EMOVE
THE
E
MBROIDERY
U
NIT
5HPRYHWKHKRRSIURPWKHPDFKLQH6HH3DJH
1. To store the embroidery unit into the box, move the carriage
to park position by selecting Park Position in the Hoop
2SWLRQ6HHSDJH
2. Turn off the machine.
3XOOWKHOHYHU%DWWKHOHIWXQGHUQHDWKWKHHPEURLGHU\XQLW
and slide the unit to the left to remove it.
The cover of the socket closes automatically.
6WRUHWKHHPEURLGHU\XQLWLQWKHRULJLQDOSDFNLQJPDWHULDO
1. Remove the presser foot and holder.
6HHSDJH
([FKDQJHWKHQHHGOHWRDQHPEURLGHU\QHHGOHD
7KHDUPERI(PEURLGHU\)RRWVKRXOGULGHDERYHWKHVKDIW
FRIWKHQHHGOHFODPS
6OLGHWKHDWWDFKLQJKHDGIURP\RXUOHIWWRULJKWVRWKDWLWLV
¿WWHGLQWRWKHSUHVVHUEDU
)RUHDVLHUDFFHVVORZHUWKHQHHGOHVOLJKWO\E\WXUQLQJWKH
hand wheel toward you.
4. Tighten the presser foot screw securely.
<RXUVHZLQJPDFKLQHFDQFRQYHUWWRHPEURLGHU\PRGHHDVLO\
by attaching the embroidery unit as follows.
b
a
c
MESSAGES AT START UP
When you turn the machine on, a series of messages will
appear on the screen.
a. If the needle is not in its highest position, this message
will appear. Turn the hand wheel toward you to raise the
QHHGOHWRLWVKLJKHVWSRVLWLRQDQGWKHQSUHVVWKH³✓´EXWWRQ
E ,IWKLVPHVVDJHDSSHDUVUHPRYHWKHKRRSLIDWWDFKHG
FOHDUWKHHPEURLGHU\DUHDDQGSUHVVWKH³✓´EXWWRQ
c. If presser foot is lowered, this message will appear. Raise
WKHSUHVVHUIRRWOLIWHUDQGSUHVVWKH³✓´EXWWRQ
When the messages a-c have cleared the screen, the
carriage will move to start point.
G 7KH+RPH6FUHHQZLOODSSHDU