SINGER SEQS-6000 FUTURA QUARTET Instruction Manual

6. The next screen prompts you to input the first of three

alignment points, A, B, and C. These alignment points

will inform the machine exactly where the crosslines

are positioned in the hoop. It is extremely important that

the points are accurately input on the cross lines. The

machine is awaiting the input of point A. See figure 3.

Shift switch

OK switch

Clear switch

Leftward

Rightward

Upward

Downward



Please Note: The buttons on the machine are lit

to indicate the “cross line” positions of the fabric

in the hoop. The blinking button is indicating the

point to be input.

If a mistake is made when entering the points,

press the clear button, (twin needle/clear button)

to clear the point(s). and then re-enter point(s).

Use the shift buttons on the machine to move the hoop,

until the needle comes to point A on the cross line, and

push the OK button.

MULTIPLE HOOP SHIFT BUTTONS AND “CROSS

LINE” INDICATOR LIGHTS FOR INPUTTING POINTS A,

B, AND C

In the case of a 2 hoop design, where one hoop is stacked

on top of the other, position the Guide Lines on the

horizontal cross line and the Center Hoop Marking on the

vertical cross line. See Fig. 4.

Center Hoop

Marking

Center Hoop

Marking

Guide Line

Fig. 5