Cisco Cisco Videoscape Voyager Vantage 3.2 User Guide

Home Networking Diagnostics

MoCA Node Rate Table Screen

MoCA Node Rate Table Screen

Tasks that you can perform from this screen include the following:



Determine the transmit rate from the local node.



Determine the data rate used for packets to all other nodes.

Brdcst Phy Rate

Data rate used for packets broadcast 
to all other nodes.

[Integer > 0]

LP CRC

Link Privacy Checksum value.

[Integer > 0]

 For two or more devices 

to form a MoCA network, their LP 
checksums must match.

# nodes

Number of remote nodes present on 
the MoCA network.

[Integer 0 < (N-1)] where N = 8 for 
MoCA 1.0 and N = 16 for MoCA 1.1

NC Node Id

Node ID of the network coordinator.

[Integer 0 < (N-1)] where N = 8 for 
MoCA 1.0 and N = 16 for MoCA 1.1

IP

IP address acquired using HHCP or 
IPv4 Link-Local protocol.

[Network-dependent]

 After Link Up, the set-top 

automatically acquires an IP address 
from a DHCP server in a MoCA 
device. If none of the MoCA Devices 
have DHCP enabled, the set-top will 
acquire an IP address using IPv4 
Link-Local Protocol.

# Tx Pckts

Number of Ethernet packets 
transmitted by this node since MoCA 
link up.

[Integer > 0]

# Rx Pckts

Number of Ethernet packets received 
by this node since MoCA link up.

[Integer > 0]

# Rx Drops

Number of Ethernet packets with 
errors dropped by this node since 
MoCA link up.

[Integer > 0]

Mask

Subnet mask of the MoCA IF IP.

[Network-dependent]

Tx Pckts drop

Number of transmitted Ethernet 
packets dropped by this node since 
MoCA link up.

[Integer > 0]

Rx Pcs correction

Number of Ethernet packets with 
errors corrected by this node since 
MoCA link up.

[Integer > 0]

Field Name

Description

Possible Values