Cisco Cisco Videoscape Voyager Vantage 3.2 User Guide
129
Cisco Systems, Inc.
www.cisco.com
Services Diagnostics
Introduction
The Services diagnostic screens let you view status and other information on tuners, video, copy protection, VOD, SAM,
PPV, SDV, EAS, and EPS, and also provide RF statistics.
PPV, SDV, EAS, and EPS, and also provide RF statistics.
These screens are divided into pages and sections organized roughly by task. Tasks that you can perform from these
screens include the following:
screens include the following:
Status Summary
Verify the current status of the boot process.
Verify the system information.
Check the amount of available memory.
Check when the DHCT was last booted and if it is receiving the correct time.
N/W and Tuning Status
Confirm the tuning mode.
Verify MPEG information for the current stream.
Confirm that the DHCT displays an RF network IP address, subnet mask, and hub ID.
Second Tuner Status
Tasks that you can perform from this screen include the following:
Verify the working status of the second QAM and second MPEG decoder.
Determine if the second tuner is picking up sufficient frequency,.
Verify the tuning mode of the second QAM.
Digital Video Status
Verify the decoding of digital video on a single screen.
Record this screen and then replay the recording later to determine the cause of any decoding issues.
Copy Protection
Verify the status of the DOCSIS network operations on your system.
Determine if the DHCT is running in DSG mode.
Verify the DNCS MAC and IP addresses.
VOD Information