Cisco Cisco Videoscape Voyager Vantage 3.2 User Guide

Accessing Vantage Diagnostic Screens

Identifying Information in Vantage Diagnostic Screens

Identifying Information in Vantage Diagnostic Screens

This section helps you to locate information within the Vantage diagnostic screens. The following example shows the 
components of an Vantage diagnostic screen.

 This screen is for illustrative purposes only.

Setting Screen Transparency

You can set the transparency level of the diagnostic pages so that you can still see the video behind the diagnostic page 
displayed. This can be helpful when you troubleshoot.

You can change the transparency level of the video using either the set-top front panel or the remote control. Press the 
GUIDE button to rotate through four available transparency levels (0%, 25%, 50%, 100%).

Exiting the Diagnostics

To exit the diagnostic screens, press the EXIT button on the front panel of the set-top or on the remote.

Rebooting the Set-Top

To reboot the set-top, press the POWER, SELECT, and GUIDE buttons on the front panel of the set-top at the same time.

 This procedure does not apply to Cisco Explorer 9865 set-tops.

You can also reboot the set-top from the diagnostics pages. See 

 for more 

information.