Cisco Cisco Videoscape Voyager Vantage 3.2 User Guide
45
Cisco Systems, Inc.
www.cisco.com
Manufacturer Diagnostics
Introduction
The Manufacturer diagnostic screens let you view information about the state of the Bootloader, system components,
Conditional Access (CA), DVR (if equipped), Linux memory, QAMs, the network, DOCSIS, common downloads, platform
components, and the home network.
Conditional Access (CA), DVR (if equipped), Linux memory, QAMs, the network, DOCSIS, common downloads, platform
components, and the home network.
These screens are divided into pages and sections that are devoted to specific tasks. Tasks that you can perform from
these screens include the following:
these screens include the following:
Host Status Summary
Verify the current status of the boot process.
Verify the system information.
Check the amount of available memory.
Check when the DHCT was last booted and if it is receiving the correct time.
Host Bootloader Information
Determine the Bootloader version number.
Verify the vendor ID for the DHCT manufacturer.
Determine the identification number of the flash ROM image.
Determine the code version table (CVT) download group for the DHCT.
Host Component Information
Verify the software and software version for each component installed on the DHCT.
Verify the release status for the software and driver components installed on the DHCT.
Determine when a component was created.
Host QAM Status
Check the integrity of the QAM signal.
Determine the current capacity of the QAM buffer.
Verify the total number of packets received since the QAM channel became active.
Determine the status of the QAM channel.
Host DAVIC Status
Confirm the power levels and frequencies of the FDC and RDC.
Confirm the network parameters for the Ethernet.