Cisco Cisco Prisma II EDR Receiver Installation Guide
Chapter 4 Operation using LCI
120
Checking the Operating Status
To Check Operating Status using LCI
Using the LCI, you can check the status of all module operating parameters.
1 In the module tree, right-click the module, and then click Details.
1 In the module tree, right-click the module, and then click Details.
The Module Details window appears as shown in the following example. The
monitored parameters are displayed under Parameters and Status.
monitored parameters are displayed under Parameters and Status.
2 Check the operating parameters.
Note:
The Communication Status parameter is reported by the LCI to indicate
communication status with the module. For help with any problems indicated
here, see Troubleshooting Alarm Conditions (on page 132).
communication status with the module. For help with any problems indicated
here, see Troubleshooting Alarm Conditions (on page 132).
For details on all operating status parameters, see Module Parameter
Descriptions (on page 139).
Descriptions (on page 139).