Cisco Headend System Release 2.7 Release Notes
Appendix D
Direct ASI Rollback Procedures
176
4019475 Rev D
11 Follow these instructions to configure the fields in the Connect To area of the
window to support the BIG.
Note: Click the arrow to the right of each field to change the value of the field.
a Set the Device Type field to BIG.
b Set the Device Name field to match the name of the BFS BIG.
c Set the Card Type field to SWIF Transmit.
Note: Click the arrow to the right of each field to change the value of the field.
a Set the Device Type field to BIG.
b Set the Device Name field to match the name of the BFS BIG.
c Set the Card Type field to SWIF Transmit.
Exception: Select Msync if your system uses ASI output from the Msync
card.
card.
d Set the Slot Number field to whatever slot the SWIF transmit card is installed
in the BIG.
e Set the Port Number field to the port used by the SWIF transmit card in the
BIG.
12 Click Save.
13 Close the Set Up QAM window.
13 Close the Set Up QAM window.