Cisco Headend System Release 2.7 Installation Guide
Appendix D
Direct ASI Rollback Procedures
150
4023737 Rev C
Record TSID Values for BFS MPEG Source and
BFS QAM
BFS QAM
Introduction
The first step in rolling back the Direct ASI installation requires that you record the
current transport stream ID (TSID) values for the BFS MPEG source and the BFS
QAM.
current transport stream ID (TSID) values for the BFS MPEG source and the BFS
QAM.
Note: If a GQAM or an MQAM is used as the BFS QAM, record the TSID for the BFS
port of the GQAM or MQAM.
port of the GQAM or MQAM.
Recording the TSID Value for the BFS MPEG Source
Follow these instructions to record the TSID for the BFS MPEG Source.
1 From the DNCS Administrative Console, click the Element Provisioning tab and
1 From the DNCS Administrative Console, click the Element Provisioning tab and
then select MPEG Source. The MPEG Source List window opens.
2 Double-click the entry for ASI_BFS. The Set Up MPEG Source window opens.
3 Select the Connectivity tab.
3 Select the Connectivity tab.
4 Record the value for TS ID here: ________________
5 Click Cancel to close the Set Up MPEG Source window.
6 Click File and then select Close to close the MPEG Source List window.
6 Click File and then select Close to close the MPEG Source List window.