Cisco Headend Digital Broadband Delivery System Installation Guide
Pre-Installation Checklist-Alarm Manager Client
78-745262-01Rev C
25
Alarm Manager Client Checklist
Answer the questions in this section to ensure that your PC meets the minimum
requirements to support the Alarm Manager client software.
Important: If you respond No to any of these questions, you must correct the
Important: If you respond No to any of these questions, you must correct the
situation before you install Alarm Manager software.
Requirement
Yes No
Follow these instructions to determine whether each Alarm Manager client
PC contains at least an Intel Pentium III processor operating at a minimum
of 750 MHz.
1
On the Windows desktop on each PC, click Start.
2
Click Programs.
3
Click Accessories.
4
Click System Tools.
5
Click System Information.
Result: The System Information window appears, which lists the
Result: The System Information window appears, which lists the
configuration of various system components.
6
Does the Processor field indicate that the client PC contains at least an
Intel Pentium III processor operating at a minimum of 750 MHz?
Note: Keep the System Information window open; you will refer to it as you
answer the following question.
Is each Alarm Manager client PC configured with a single CPU?
Important: Alarm Manager client software will not run on a PC with a dual-
Important: Alarm Manager client software will not run on a PC with a dual-
CPU configuration.
Notes:
Notes:
The Processor field indicates how many CPUs are installed on the PC.
Keep the System Information window open; you will refer to it as you
answer the following question.