Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Stop and Disable Unneeded DNCS Processes
4042225 Rev B
89
Stop and Disable Unneeded DNCS Processes
After the SR 5.0 upgrade completes and the DNCS processes are started, all
processes will be running (green). If your system included DNCS processes that
were not running or enabled before the upgrade they should be stopped and/or
disabled after the upgrade.
To stop and disable a DNCS process, complete the following procedure.
Example: The example used throughout this procedure involves stopping and
disabling the ocdlManager process.
1 If your DNCS Administrative Console has not yet launched, go to a dncs xterm
processes will be running (green). If your system included DNCS processes that
were not running or enabled before the upgrade they should be stopped and/or
disabled after the upgrade.
To stop and disable a DNCS process, complete the following procedure.
Example: The example used throughout this procedure involves stopping and
disabling the ocdlManager process.
1 If your DNCS Administrative Console has not yet launched, go to a dncs xterm
window and type the following command and press Enter to open the console.
admincon
2 Click Process Status and then click Show to view the DNCS Process Status
window.
Note: In this example, the ocdlManager process is running (green).