Cisco Cisco D9824 Advanced Multi Decryption Receiver Installation Guide
Setting up Input Information
78-4039426-01 Rev D
133
Parameter
Description
ASI Transport
Indicates the current transport synchronization status (Error,
Ok, or N/A).
Ok, or N/A).
ASI Packet Size (bytes)
Indicates the packet size (in bytes) for the ASI input (188, 204,
or N/A).
or N/A).
Acquisition State
Displays Full if the ASI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.
Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.
TS ID
The Transport ID (in the range from 1 to 65535).
Network ID
The Network ID (in the range from 1 to 65535) of the uplink
signal the receiver is to receive when using the selected preset.
The receiver’s Network ID must match the Network ID
associated with the transmitted signal that identifies the NIT to
be used.
signal the receiver is to receive when using the selected preset.
The receiver’s Network ID must match the Network ID
associated with the transmitted signal that identifies the NIT to
be used.
Note: Each network must be assigned a unique ID (number).
5 Click Apply.