Cisco Cisco D9032 MPEG-2 Encoder Installation Guide
4
4015277 Rev C
Upgrading the Software
Upgrading the Software
To Upgrade the Software
Important: The Advanced Video Input Board requires a software version v02.06 or
greater.
Perform the following steps to upgrade the software to version v02.06 or greater:
Perform the following steps to upgrade the software to version v02.06 or greater:
1.
Power up the unit and connect it to a PC via an Ethernet LAN.
2.
Enter the GUI by typing the unit’s IP address in the Internet Explorer address field.
3.
From the user interface of the D9032 Encoder click the System tab and the System
icon from the sub-pages.
4.
Store the old setting files before upgrading to a new software version.
This enables you to restore your settings if you need to downgrade
This enables you to restore your settings if you need to downgrade
5.
Click the Upgrade button.
6.
Browse to the appl.pkg file and click Transfer.
Note: It may take several minutes to upgrade the software for all 4 modules.
Important: Due to a restriction in the MS Internet Explorer the path of the software
Note: It may take several minutes to upgrade the software for all 4 modules.
Important: Due to a restriction in the MS Internet Explorer the path of the software
package file (appl.pkg) should be less than 50 characters long.