Cisco Cisco AnyConnect Secure Mobility Client v2.x Troubleshooting Guide

The VPN connection was started by a remote desktop user whose remote console has 

been disconnected. It is presumed the VPN routing configuration is responsible for 

the remote console disconnect. The VPN connection has been disconnected to allow 

the remote console to connect again. A remote desktop user must wait 90 seconds 

after VPN establishment before disconnecting the remote console to avoid this 

condition.

AnyConnect detected a remote console disconnect within 90 seconds of the 

establishment of a VPN session. AnyConnect terminated the session because it detected an 
interruption of the remote console session, indicating the necessity of restoring the local IP 
forwarding table to permit the re-establishment of the remote console session.

Remote console users should wait more than 90 seconds following VPN 

connection establishment before disconnecting the remote console session to avoid this condition.

The VPN connection was terminated by the secure gateway and could not be 

automatically re-established. A new connection is necessary, which requires 

re-authentication.

Automatic VPN reconnection attempts failed. The VPN connection required an 

automatic reconnection because the secure gateway closed the connection.

Remote console users should wait more than 90 seconds following VPN 

connection establishment before disconnecting the remote console session to avoid this condition.

The VPN connection was terminated due to a different client IP address assignment 

by the secure gateway and could not be automatically re-established. A new 

connection is necessary, which requires re-authentication.

Automatic VPN reconnection attempts failed. The VPN connection required an 

automatic reconnection because the secure gateway returned a different private network IP address 
in response to an IP address renewal request.

Try to start a new VPN connection.

The VPN connection was terminated due to a loss of communication with the secure 

gateway. A new connection is necessary, which requires re-authentication.

AnyConnect cannot contact the secure gateway. Possible causes include a loss of 

network connectivity or a problem with the gateway.

Verify network connectivity, then try a new VPN connection. 

The VPN connection was terminated due to a new network interface and could not be 

automatically re-established.  A new connection is necessary, which requires 

re-authentication. 

Automatic VPN reconnection attempts failed. The VPN connection required automatic 

reconnection due to a new network interface.

Try to start a new VPN connection.