Cisco Cisco Web Security Appliance S670 User Guide
25-11
Cisco IronPort AsyncOS 7.7 for Web User Guide
Chapter 25 Configuring Network Settings
Configuring Transparent Redirection
Configuring Transparent Redirection
When you configure the Web Security appliance web proxy service in transparent mode, you must
connect the appliance to an Layer 4 switch or a WCCP v2 router, and you must configure the appliance
so it knows to which device it is connected. You configure the device on the Network > Transparent
Redirection page.
connect the appliance to an Layer 4 switch or a WCCP v2 router, and you must configure the appliance
so it knows to which device it is connected. You configure the device on the Network > Transparent
Redirection page.
Figure 25-3
Network > Transparent Redirection Page
On this page, you can choose the device that transparently redirects traffic to the appliance, either an
Layer 4 switch or a WCCP router. When you choose an Layer 4 switch as the device, there is nothing
else to configure on this page.
Layer 4 switch or a WCCP router. When you choose an Layer 4 switch as the device, there is nothing
else to configure on this page.
However, when you choose a WCCP router as the device, you must create at least one WCCP service.
[]> v.example.com
Currently configured interfaces:
1. Management (10.10.1.10/24 on Management: example.com)
2. P1 (10.10.0.10 on P1: example.com)
3. VLAN 34 (10.10.31.10 on VLAN 34: v.example.com)
Choose the operation you want to perform:
- NEW - Create a new interface.
- EDIT - Modify an interface.
- DELETE - Remove an interface.
[]>
example.com> commit