Cisco Cisco TelePresence MCU 4510 Document
Deploying an MCU registered to Cisco TelePresence VCS
Cisco TelePresence MCU Deployment Guide
Page 20 of 32
This matches the search rule for MCU1 which has domain mcu1.cisco.com, but the MCU expects to
receive a URI in this format and so no alteration is made before the call is sent to the MCU zone.
receive a URI in this format and so no alteration is made before the call is sent to the MCU zone.
Optional: Configuring Multiway
Enable Multiway on the VCS as follows:
1. Go Applications > Conference Factory.
2. Configure the fields on the VCS as follows:
Table 13: Settings for enabling Multiway
VCS Setting
Value
Comment
Mode
On
Alias
URI of this Conference Factory
(this is the Multiway ID that is
configured into endpoints, that
they call to initiate a Multiway
conference)
(this is the Multiway ID that is
configured into endpoints, that
they call to initiate a Multiway
conference)
Example: multiway@cisco.com
Template
A template for a URI that will
route calls to an MCU ad hoc
conference.
route calls to an MCU ad hoc
conference.
Example: 819%%@cisco.com
Note: These calls will get routed to
MCU based on the search rules
configured above.
Note: These calls will get routed to
MCU based on the search rules
configured above.
Number range start and end
A range that matches your dial
plan.
plan.
Example: 10-99
3. Click Save.
To ensure that the Multiway request is processed quickly, configure a search rule on the VCS as
follows:
follows:
1. Go to VCS configuration > Dial plan > Search rules.
2. Click New.
3. Configure the fields on the VCS as follows:
Table 14: Settings for creating a Multiway search rule on a Cisco VCS
VCS Setting
Value
Comment
Rule name
Descriptive name for the search
rule
rule
Example name: Multiway Zone
Description
Description of the rule
Example name: Search Multiway
Zone
Zone
Priority
1
To ensure the lowest possible
latency before the call is initiated
latency before the call is initiated
Source
Any
Request must be authenticated
Configure the authentication
settings according to your
authentication policy
settings according to your
authentication policy
Refer to Authentication Policy
configuration options in the VCS
online help for full details.
configuration options in the VCS
online help for full details.
Mode
Alias pattern match
Pattern type
Exact
Pattern string
Conference Factory Alias as
configured under Applications >
Conference Factor
configured under Applications >
Conference Factor
Example: multiway@cisco.com
Pattern behavior
Leave
On successful match
Stop
Target zone
LocalZone
State
Enabled