Cisco Cisco TelePresence MCU 4510 Document
Deploying an MCU as a Unified CM media resource
Cisco TelePresence MCU Deployment Guide
Page 31 of 32
Step 3: On Unified CM, adding the MCU
Add the MCU to Unified CM as a manageable device as follows:
1. Go to Media Resources > Conference Bridge.
2. Click Add New.
3. Select Conference Bridge Type as Cisco TelePresence MCU.
4. Enter relevant fields and click Save.
Step 4: On Unified CM, configuring a media resource group list
1. Go Media Resources > Media Resource Group.
2. Click Add New.
3. Choose a name and move the MCU(s) into the Selected Media Resources area.
4. Click Save.
5. Go to Media Resources > Media Resource Group List.
6. Click Add New.
7. Choose a name and move the created Media Resource Groups into the Selected Media
Resource Groups area.
8. Click Save.
Step 5: On Unified CM, assigning a Media Resource Group List to a
device
device
1. Go to Device > Phone.
2. Select a device.
3. Choose the Media Resource Group List that you created earlier.
4. Click Save.
Optional: On Unified CM, setting
up a “Meet Me” service
If a rendezvous service is required, this can be setup as per the documentation list above.