Cisco Cisco TelePresence MCU 4510 Document
Which deployment?
Cisco TelePresence MCU Deployment Guide
Page 9 of 32
Which deployment?
Each deployment has unique benefits that are described below.
Deploying an MCU using Cisco TelePresence VCS
This deployment uses VCS as the call control device for the MCU (see the figure below). (However in
deployments where Unified CM is installed it can be trunked to VCS and devices registered to either
call control platform can call the MCU. See the combined MCU section below for more detail.)
deployments where Unified CM is installed it can be trunked to VCS and devices registered to either
call control platform can call the MCU. See the combined MCU section below for more detail.)
Figure 1: VCS deployment: media, signaling and scheduling overview
This deployment allows scheduled conferences and those initiated by the ad hoc methods described
in the following table.
in the following table.
Table 3: MCU with VCS deployment capability overview
Conference type
Options
Scheduled
Using TMS either directly or via an integration, for
instance with Microsoft Exchange
instance with Microsoft Exchange
Ad hoc
Auto attendant
Rendezvous
– either statically configured on an MCU or
dynamically created by MCU on dialing a conference
number.
number.
Dynamic escalation
– using Multiway