Cisco Cisco TelePresence MCU 4510 User Guide

Using in-conference features

11

When using ConferenceMe you can scroll through participants in the same way as 
you would using a hardware endpoint.
Use the Left/Right keys on your keyboard to scroll through participants.
Alternatively, you can select Next participant from the right-click menu.

When using Movi you can use the DTMF keypad to scroll through participants.
Use the 4/6 keys on the keypad to scroll through participants.

During a conference, you might need to change the camera settings for one of the 
conference participants. To do this, use FECC or DTMF tones.
1

Enable FECC or DTMF tones, depending on your video endpoint.

2

Select the participant whose camera you want to control. Refer to Selecting 
participants earlier in this document.

3

Press zoom in (or 1 if using DTMF tones) to enter the mode which passes the 
navigation and zoom controls through to the participant's camera.

4

Use FECC or DTMF tones to control the participant’s camera.

5

To stop controlling the participant’s camera, wait five seconds.

The table below describes the icons that appear on-screen.

You are now controlling the far-end video camera

You are moving the far-end video camera to the left or right.
(If you are using the numeric keypad to navigate, use 4 for left 
and 6 for right)
You are moving the far-end video camera up and down. 
(If you are using the numeric keypad to navigate, use 2 for up 
and 8 for down)