Cisco Cisco TelePresence MCU 4510 Administrator's Guide
Configuring IP services
To configure IP services, go to
Network > Services
.
Use this page to control the type of services that may be accessed via Ethernet ports A and B. For example,
if one Ethernet port is connected to a network outside your organization's firewall, you can restrict the level of
access that external users are entitled to on that port by, for example, enabling HTTPS for IPv4 and IPv6.
if one Ethernet port is connected to a network outside your organization's firewall, you can restrict the level of
access that external users are entitled to on that port by, for example, enabling HTTPS for IPv4 and IPv6.
To prevent accidental lock-outs, the system does not allow you to disable the service that is currently being
used to administer the MCU. For example, if you are configuring the gateway over HTTP and coming in on
Port A, then the option to change the HTTP service for Port A will be unavailable in the interface.
used to administer the MCU. For example, if you are configuring the gateway over HTTP and coming in on
Port A, then the option to change the HTTP service for Port A will be unavailable in the interface.
Refer to the table below for more details.
In addition to controlling the Ethernet interfaces over which a service operates, this page also allows an
administrator to specify the port number on which that service is provided. If the port number for a service is
changed, it is necessary to ensure that the new value chosen does not clash with the port number used by
any of the other services. However, in most circumstances, the pre-configured default values will suffice.
administrator to specify the port number on which that service is provided. If the port number for a service is
changed, it is necessary to ensure that the new value chosen does not clash with the port number used by
any of the other services. However, in most circumstances, the pre-configured default values will suffice.
The settings on this page apply to both IPv4 and IPv6 addressing. The page displays the IPv4 and/or IPv6
values per port, depending on whether IPv4 and/or IPv6 are enabled for the port. When specifying settings
use the appropriate column for the required addressing scheme.
values per port, depending on whether IPv4 and/or IPv6 are enabled for the port. When specifying settings
use the appropriate column for the required addressing scheme.
Note that by default SNMP Traps are sent to UDP port 162 (on the destination network management station);
this is configurable. For more information, refer to
this is configurable. For more information, refer to
To reset all values back to their factory default settings, click Reset to default and then click Apply
changes.
changes.
Field
Field description
Usage tips
TCP service
HTTP
Enable/disable HTTP access on
the specified interface or change
the port that is used for this service.
the specified interface or change
the port that is used for this service.
HTTP access is required to view and change the MCU
web pages and read online help files. If you disable
HTTP access on both Ports A and B, you will need to use
the serial console interface to re-enable it.
web pages and read online help files. If you disable
HTTP access on both Ports A and B, you will need to use
the serial console interface to re-enable it.
Note that QuickTime uses RTSP by default which is listed
as Streaming (other) on the
as Streaming (other) on the
Network > Services
page.
However, the QuickTime player can be configured to use
HTTP instead.
HTTP instead.
If you require advanced security for the MCU, enable
HTTPS and disable HTTP access.
HTTPS and disable HTTP access.
If a port is disabled, this option will be unavailable.
HTTPS
Enable/disable HTTPS access, or
change the port number used for
HTTPS, on the specified interface.
change the port number used for
HTTPS, on the specified interface.
This field is only visible if the MCU has the Secure
management (HTTPS) feature key or an Encryption
feature key installed. For more information about
installing feature keys, refer to
management (HTTPS) feature key or an Encryption
feature key installed. For more information about
installing feature keys, refer to
By default, the MCU has its own SSL certificate and
private key. However, you can upload a new private key
and certificates if required. For more information about
SSL certificates, refer to
private key. However, you can upload a new private key
and certificates if required. For more information about
SSL certificates, refer to
.
If a port is disabled, this option will be unavailable.
Cisco TelePresence MCU Series Administrator Guide
Page 159 of 300
Configuring network and system settings
Configuring IP services