Cisco Cisco TelePresence MCU 4510 Administrator's Guide
Background noise
It is important to minimize background noise (hiss) as much as possible. This includes ambient noises such
as road noise and slamming doors etc. but also try to keep fan noise and similar to a minimum.
as road noise and slamming doors etc. but also try to keep fan noise and similar to a minimum.
When played back by the MCU, samples with background noise are very apparent.
Consistency
If possible, record all voice prompts in one session. This will ensure that all voice and background conditions
remain constant and the recorded voice will sound similar from prompt to prompt.
remain constant and the recorded voice will sound similar from prompt to prompt.
Volume
Record prompts using a relatively constant loudness of voice. Although it may take some trial and error, the
best recordings will result from speaking loud enough that the voice is recorded loudly compared to any
residual background noise, but not so loudly that it sounds distorted when played back.
best recordings will result from speaking loud enough that the voice is recorded loudly compared to any
residual background noise, but not so loudly that it sounds distorted when played back.
Customizing auto attendant and text overlay font
A Cisco-supplied TrueType font is used for auto attendant and overlay text. This file is installed by default
but, if it is not present on your MCU, it is also available from the software downloads area of the Cisco
website.
but, if it is not present on your MCU, it is also available from the software downloads area of the Cisco
website.
To upload a font file:
1. Go to
Settings > User interface
.
2. In the
Overlay text
section, click the Browse button next to the New font file field.
3. Locate the required font file and click Upload font. The Font file status changes to Present.
Cisco TelePresence MCU Series Administrator Guide
Page 249 of 300
Advanced topics
Customizing the user interface