Cisco Cisco TelePresence MCU 4510 Administrator's Guide
Mute
in-
band
DTMF
in-
band
DTMF
This control determines whether the DTMF tones from this
participant are audible to the conference. You can select one of
the following:
participant are audible to the conference. You can select one of
the following:
n
<use conference configuration>: DTMF from the active
participant is either muted or audible to the conference,
depending on the conference configuration.
participant is either muted or audible to the conference,
depending on the conference configuration.
n
Disabled: DTMF from this participant is audible to the MCU
and is transmitted on to the other participants.
and is transmitted on to the other participants.
n
Enabled: DTMF from this participant is audible to the MCU
but is not transmitted on to other participants.
but is not transmitted on to other participants.
Prevents others from hearing this participant (like mic. mute).
Allows others to hear this participant (stop muting participant).
Prevents this participant from hearing the conference (like
speaker mute).
speaker mute).
Note: The endpoint may not always detect DTMF tones from the
MCU after you mute the audio from the MCU.
MCU after you mute the audio from the MCU.
Allows this participant to hear the conference (stop muting
conference).
conference).
Selecting a custom participant view
You can add a custom layout to the choice of layouts available for this participant. You can customize this
view by choosing this option:
view by choosing this option:
1. Go to
Conferences
.
2. Click a Conference name and then click on a participant's name.
3. Click the
Custom layout
tab.
Field
Field description
Usage tips
Current
status
status
Indicates whether a custom layout can be used
for this participant.
for this participant.
When you click a new layout from the
Available
layouts
, Enabled is automatically chosen with
the most recent layout selected.
Cisco TelePresence MCU Series Administrator Guide
Page 93 of 300
Managing conferences
Managing participants