Cisco Cisco TelePresence MCU 4510 Maintenance Manual

Page of 235
Multicast
IP
address
range
Identifies the range of IPv4 or IPv6
addresses to which multicast streaming
media should be sent.
If this address range is not configured, the MCU cannot
transmit multicast conference media.
Any changes you make to the multicast IP address ranges or
port ranges are not immediately effective on any live
streaming sessions. To force an immediate change, you
need to disable and re-enable global multicast streaming.
IP port
number
range
Sets the range of port numbers to which
the media will be sent to this range of
IPv4 or IPv6 addresses.
This UDP port number range is used in conjunction with the
IP address range.
You must set both the start and end port numbers to transmit
multicast conference media.
Windows Media Player
Protocol
Identifies the protocol used by Windows
Media Player to stream data. Note that
v11 only supports HTTP; it no longer
supports MMS over UDP or MMS over
TCP.
MMS over UDP is a low latency/ high throughput protocol,
while MMS over TCP includes extra reliability, though extra
processing power is required. Both use the streaming port,
so if a restrictive firewall is present HTTP may be necessary.
Auto negotiation attempts to open the most efficient
connection, switching protocols if unable to do so, but on
some systems this is not efficient. Cisco recommends that
you select to use UDP/TCP/HTTP rather than auto-
negotiation.
Configuring ConferenceMe Settings
Refer to this table for assistance setting up ConferenceMe. After you have completed the fields, click Apply
changes
.
Field
Field Description
Usage Tips
Allow fall back
to media using
TCP
Controls the ability of the MCU to connect
using TCP if a UDP connection is not
available.
ConferenceMe can connect using either UDP or
TCP. When connecting using UDP, ConferenceMe
will have better network performance, resulting in
better video being sent to and received from the
MCU.
Allow
ConferenceMe
to use web
service
Enabling this option allows ConferenceMe
users to access a small subset of web user
interface pages that allow them to join
conferences via ConferenceMe and invite
other users to join the conference.
Maximum
ConferenceMe
connections
The maximum number of ConferenceMe
participants allowed on the MCU.
Allows you to define the number of ConferenceMe
connections on your MCU, from a minimum of 0 to
a maximum of 12. That is, you can have the
defined number of participants in one conference
or shared across several conferences.
Maximum
bandwidth
from MCU
The maximum bandwidth that can be sent
from your MCU to ConferenceMe.
Maximum
bandwidth to
MCU
The maximum bandwidth that can be
received by your MCU from ConferenceMe.
178
Cisco TelePresence MCU Series Online Printable Help