Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Displaying and resetting system time
Cisco TelePresence MCU Version 4.2 Printable online help
Page 200 of 252
Using NTP over NAT (Network Address Translation)
If NAT is used between the MCU and the NTP server, with the MCU on the NAT's local network (and
not the NTP server), no extra configuration is required.
not the NTP server), no extra configuration is required.
If NAT is used between the MCU and the NTP server, with the NTP server on the NAT's local network,
then configure the NAT forwarding table to forward all data to UDP port 123 to the NTP server.
then configure the NAT forwarding table to forward all data to UDP port 123 to the NTP server.