Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Using in-conference features with video endpoints
Cisco TelePresence MCU Version 4.2 Printable online help
Page 24 of 252
There are streaming participants in this conference.
The zoom out menu
The zoom out menu provides access to a number of in-conference options. Access the following
options by pressing zoom out if you are using FECC, or 7 on a DTMF keyboard (on an endpoint that
does not have an FECC channel):
options by pressing zoom out if you are using FECC, or 7 on a DTMF keyboard (on an endpoint that
does not have an FECC channel):
widescreen mode (whether this option is available or not depends on the Transmitted video
resolutions setting on the Settings > Conferences page and on the capabilities of the endpoint)
resolutions setting on the Settings > Conferences page and on the capabilities of the endpoint)
borders
mute audio
mute video
clear text chat (this option only appears if there is text chat on the screen)
return to auto attendant (this option only appears if the participant joined the conference from the
auto attendant)
auto attendant)
The conference welcome message
You can configure a welcome message on the MCU and a duration for that message. Participants
joining a conference on the MCU will see the message displayed at the bottom of their endpoint's
display. After the configured message duration has elapsed, the message will be removed.
joining a conference on the MCU will see the message displayed at the bottom of their endpoint's
display. After the configured message duration has elapsed, the message will be removed.
The Conference welcome message controls are on the Settings > Conferences page (refer to
).
The welcome message will only be displayed to streaming viewers if the duration is configured as
permanent.
permanent.
If you change the welcome message when there are active participants, any participants’ currently
displayed welcome messages will only change if the new message is configured as permanent.
displayed welcome messages will only change if the new message is configured as permanent.