Cisco Cisco TelePresence MCU 4510 Maintenance Manual

Displaying statistics for a participant

Cisco TelePresence MCU Version 4.2 Printable online help

Page 98 of 252

Control statistics

Control statistics provide information about the control channels that are established in order that the
endpoints can exchange information about the voice and video streams (Real Time Control Protocol
(RTCP) packets). Refer to the table below for additional information.

Field

Field description

Usage tips

Audio

RTCP receive
address

The IP address and port to which RTCP
(Real Time Control Protocol) packets are
being received for the audio and video
streams

Receiver
reports

A count of the number of "receiver report"
type RTCP packets seen by the MCU.

A single RTCP packet may contain more
than one report of more than one type.
These are generally sent by any device
receiving RTP (Real Time Protocol) media
from the network and are used for auditing
bandwidth, errors, and so on by the MCU.

Packet loss
reported

Media packet loss reported by receiver
reports sent to the MCU by the far end.

Sender
reports

A count of the number of "sender report"
type RTCP packets received by the MCU.

These are typically sent by any device that
is sending RTP media.

Other

A count of the number of reports seen by
the MCU that are neither sender nor
receiver reports.

RTCP
transmit
address

The IP address and port to which the MCU
is sending RTCP packets about this
stream.

Packets sent

The number of packets sent.

Video (primary channel and content shown separately)