Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Trap receiver
addresses 1
to 4
addresses 1
to 4
Enter the IP address
or hostname for up to
four devices that will
receive both the
general and the
authentication failure
traps.
or hostname for up to
four devices that will
receive both the
general and the
authentication failure
traps.
The traps that are sent by the MCU for IPv4 are SNMP v1 traps. For
IPv6 the MCU sends SNMP v2 traps. You can configure trap receivers
or you can view the MIB using a MIB browser. You can set the UDP
port number for the trap in the format <IP address>: <port number>. By
default the UDP port number is 162. Note that square brackets are
mandatory for IPv6 addresses.
IPv6 the MCU sends SNMP v2 traps. You can configure trap receivers
or you can view the MIB using a MIB browser. You can set the UDP
port number for the trap in the format <IP address>: <port number>. By
default the UDP port number is 162. Note that square brackets are
mandatory for IPv6 addresses.
Access control
Field
Field description
Usage tips
RO
community
community
Community string/password that gives
read-only access to all trap information.
read-only access to all trap information.
Note that SNMP community strings are not secure. They
are sent in plain text across the network.
are sent in plain text across the network.
RW
community
community
Community string/password that gives
read/write access to all trap information.
read/write access to all trap information.
We recommend that you change the community strings
before enabling SNMP as the defaults are well known.
before enabling SNMP as the defaults are well known.
Trap
community
community
Community string/password that is sent
with all traps.
with all traps.
Some trap receivers can filter on trap community.
Related topics
n
n
n
n
Cisco TelePresence MCU Series 4.5 Online Printable Help
Page 170 of 278
Configuring network and system settings
Configuring SNMP settings