Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Facility
value
value
A configurable value for the
purposes of identifying events from
the MCU on the Syslog host.
Choose from the following options:
purposes of identifying events from
the MCU on the Syslog host.
Choose from the following options:
n
0 - kernel messages
n
1 - user-level messages
n
2 - mail system
n
3 - system daemons
n
4 - security/authorization
messages (see Note)
n
5 - messages generated
internally by syslogd
n
6 - line printer subsystem
n
7 - network news subsystem
n
8 - UUCP subsystem
n
9 - clock daemon (see Note)
n
10 - security/authorization
messages (see Note)
n
11 - FTP daemon
n
12 - NTP subsystem
n
13 - log audit (see Note)
n
14 - log alert (see Note)
n
15 - clock daemon (see Note)
n
16 - local use 0 (local0)
n
17 - local use 1 (local1)
n
18 - local use 2 (local2)
n
19 - local use 3 (local3)
n
20 - local use 4 (local4)
n
21 - local use 5 (local5)
n
22 - local use 6 (local6)
n
23 - local use 7 (local7)
Choose a value that you will remember as being the MCU.
Note: Various operating system daemons and processes have
been found to utilize Facilities 4, 10, 13 and 14 for
security/authorization, audit, and alert messages which seem to
be similar.
been found to utilize Facilities 4, 10, 13 and 14 for
security/authorization, audit, and alert messages which seem to
be similar.
Various operating systems have been found to utilize both
Facilities 9 and 15 for clock (cron/at) messages.
Facilities 9 and 15 for clock (cron/at) messages.
Processes and daemons that have not been explicitly assigned
a Facility value may use any of the "local use" facilities (16 to 21)
a Facility value may use any of the "local use" facilities (16 to 21)
or they may use the "user-level" facility (1) - and these are the
values that we recommend you select.
Using syslog
The events that are forwarded to the syslog receiver hosts are controlled by the event log capture filter.
To define a syslog server, simply enter its IP address and then click Update syslog settings. The number of
packets sent to each configured host is displayed next to its IP address.
packets sent to each configured host is displayed next to its IP address.
Cisco TelePresence MCU Series 4.5 Online Printable Help
Page 247 of 278
Advanced topics
Logging using syslog