Cisco Cisco Web Security Appliance S690 Installation Guide
15
9
Power Up the Appliance
Power up the appliance by pressing the On/Off switch on the
front panel of the Cisco S380 and Cisco S680. You must wait
five minutes for the system to initialize each time you power up
the system. After the machine powers up, a solid green light
indicates that the appliance is operational.
front panel of the Cisco S380 and Cisco S680. You must wait
five minutes for the system to initialize each time you power up
the system. After the machine powers up, a solid green light
indicates that the appliance is operational.
Note
If turned on quickly after connecting power to the
appliance, the appliance powers up, the fans spin and
the LEDs turn on. Within 30-60 seconds, the fans stop
and all LEDs turn off. The appliance powers on 31
seconds later. This behavior is by design to allow the
system firmware and controller to synchronize.
appliance, the appliance powers up, the fans spin and
the LEDs turn on. Within 30-60 seconds, the fans stop
and all LEDs turn off. The appliance powers on 31
seconds later. This behavior is by design to allow the
system firmware and controller to synchronize.
Wait
5 minutes
303503
Power