Cisco Cisco TelePresence Video Communication Server Expressway Release Notes
Known limitations
Cisco TelePresence Video Communication Server X7.0.1 Software Release Notes
Page 14 of 29
Known limitations
Polycom
Equipment / Version / Protocol
Summary
HDX 9000 / 3.0.0.2 and 3.0.2 /
SIP
SIP
An H.323 call routed via Cisco VCS will not connect when the destination is
Polycom HDX registering using SIP.
Polycom HDX does not send a response to Cisco VCS interworked SIP
INVITE request.
Polycom HDX registering using SIP.
Polycom HDX does not send a response to Cisco VCS interworked SIP
INVITE request.
VSX 7000 / 9.0.6.1 / SIP
A SIP call routed via the Cisco VCS to a Cisco TelePresence System
Integrator C Series (using H.323) will connect, however the call will be
disconnected when the VSX attempts to refresh the session.
VSX attempts to refresh session using an UPDATE request, which is not
supported by Cisco VCS.
Integrator C Series (using H.323) will connect, however the call will be
disconnected when the VSX attempts to refresh the session.
VSX attempts to refresh session using an UPDATE request, which is not
supported by Cisco VCS.
VSX 7000 / 9.0.6.1 / H.323
An H.323 call routed via the Cisco VCS will connect when the destination is
Cisco IP Video Phone E20 (using SIP), however no video will be seen on
the E20.
Polycom VSX does not open the media channel that is signalled during call
set up.
Cisco IP Video Phone E20 (using SIP), however no video will be seen on
the E20.
Polycom VSX does not open the media channel that is signalled during call
set up.
Lifesize
Equipment / Version / Protocol
Summary
Room / 4.6.0 / SIP
An H.323 call routed via Cisco VCS will be disconnected when the H.323
party puts the call on-hold.
Lifesize Room (SIP) incorrectly responds to Cisco SDP (media capability)
offer.
This issue is resolved in Lifesize Room version 4.8.3.
party puts the call on-hold.
Lifesize Room (SIP) incorrectly responds to Cisco SDP (media capability)
offer.
This issue is resolved in Lifesize Room version 4.8.3.
Room / 4.6.0 / SIP
A Movi SIP call routed via Cisco VCS will connect, however no video will be
seen on the Lifesize Room.
Lifesize Room (SIP) incorrectly responds to Cisco SDP (media capability)
offer.
This issue is resolved in Lifesize Room version 4.8.3.
seen on the Lifesize Room.
Lifesize Room (SIP) incorrectly responds to Cisco SDP (media capability)
offer.
This issue is resolved in Lifesize Room version 4.8.3.
Room / 4.6.0 / H.323
A C20 or E20 SIP call routed via Cisco VCS will connect, however no video
will be seen on the Lifesize Room.
C20 and E20 do not send media to Lifesize after call is connected.
This issue is resolved in Lifesize Room version 4.8.3.
will be seen on the Lifesize Room.
C20 and E20 do not send media to Lifesize after call is connected.
This issue is resolved in Lifesize Room version 4.8.3.
Room / 4.6.0 and 4.8.3 / H.323
A Movi SIP call routed via Cisco VCS will connect, however no video will be
seen on the LifeSize Room system if an HD camera is used and the
requested bandwidth is > 1MBps.
seen on the LifeSize Room system if an HD camera is used and the
requested bandwidth is > 1MBps.
Cisco TelePresence Content Server
Reference ID
Equipment
Summary
117815
TelePresence
Content Server
Content Server
The SIP Standard registration refresh minimum setting
introduced in VCS X7.0 has a default value of 45 seconds.
Devices that request a value lower than the Standard registration
introduced in VCS X7.0 has a default value of 45 seconds.
Devices that request a value lower than the Standard registration