Cisco Cisco TelePresence Video Communication Server Expressway Maintenance Manual
Dial plan and call processing
Cisco VCS Administrator Guide (X7.2)
Page 179 of 498
Field
Value
Pattern type
Suffix
Pattern string
example.com
Pattern behavior
Replace
Replace string
example.co.uk
On successful match
Continue
Target zone
Head office
State
Enabled
Rule #2
Field
Value
Rule name
Transform to example.net
Description
Transform example.com to example.net
Priority
100
Source
Any
Request must be
authenticated
authenticated
No
Mode
Alias pattern match
Pattern type
Suffix
Pattern string
example.com
Pattern behavior
Replace
Replace string
example.net
On successful match
Continue
Target zone
Head office
State
Enabled
Stripping @domain for dialing to H.323 numbers
SIP endpoints can only make calls in the form of URIs - for example name@domain. If the caller does not
specify a domain when placing the call, the SIP endpoint automatically appends its own domain to the
number that is dialed. So if you dial 123 from a SIP endpoint, the search will be placed for 123@domain. If
the H.323 endpoint being dialed is registered as 123, the VCS will be unable to locate the alias 123@domain
and the call will fail.
specify a domain when placing the call, the SIP endpoint automatically appends its own domain to the
number that is dialed. So if you dial 123 from a SIP endpoint, the search will be placed for 123@domain. If
the H.323 endpoint being dialed is registered as 123, the VCS will be unable to locate the alias 123@domain
and the call will fail.
If you have a deployment that includes both SIP and H.323 endpoints that register using a number, you will
need to set up the following
need to set up the following
and
. Together these will let users
place calls from both SIP and H.323 endpoints to H.323 endpoints registered using their H.323 E.164 number
only.
only.