Cisco Cisco TelePresence Video Communication Server Expressway Maintenance Manual

209

D14049.08 
November 2010

Grey Headline (continued)

CISCO TELEPRESENCE

 VIDEO COMMUNICATION SERVER

ADMINISTRATOR GUIDE

Command reference - xConfiguration

Error Reports Mode: <On/Off> 

Determines whether the VCS will automatically send details of application failures to a specified web service. 
Default: Off

Example:

Error Reports URL: <S: 0, 128> 

The URL of the web service to which error reports are sent. 
Default: http://vcser.tandberg.com/submitapplicationerror/

Example:

Ethernet [1..2] IP V4 Address: <S: 7..15> 

Specifies the IPv4 address of the specified LAN port. Note: you must restart the system for any changes to take effect.

Example:

Ethernet [1..2] IP V4 StaticNAT Address: <S:7..15>

If the VCS is operating in static NAT mode, this specifies the external public IPv4 address of that static NAT. Note: you must restart the system for any changes to take effect.

Example:

Ethernet [1..2] IP V4 StaticNAT Mode: <On/Off>

Specifies whether the VCS is located behind a static NAT. Note: You must restart the system for any changes to take effect.
Default: Off

Example:

Ethernet [1..2] IP V4 SubnetMask: <S: 7..15> 

Specifies the IPv4 subnet mask of the specified LAN port. Note: you must restart the system for any changes to take effect. 

Example:

Ethernet [1..2] IP V6 Address: <S: 0, 39> 

Specifies the IPv6 address of the specified LAN port. Note: you must restart the system for any changes to take effect 

Example:

Ethernet [1..2] Speed: <Auto/10half/10full/100half/100full/1000full 

Sets the speed of the Ethernet link from the specified LAN port. Use Auto to automatically configure the speed. Note: you must restart the system for any changes to take effect. 
Default: Auto

Example:

ExternalManager Address: <S: 0, 128> 

Sets the IP address or Fully Qualified Domain Name (FQDN) of the external manager. 

Example: