Cisco Cisco TelePresence Video Communication Server Expressway Maintenance Manual
213
D14049.08
November 2010
November 2010
Grey Headline (continued)
CISCO TELEPRESENCE
VIDEO COMMUNICATION SERVER
ADMINISTRATOR GUIDE
Command reference - xConfiguration
IP Gateway: <S: 7..15>
Specifies the IPv4 gateway of the VCS. Note: you must restart the system for any changes to take effect.
Default: 127.0.0.1
Default: 127.0.0.1
Example:
xConfiguration IP Gateway: "192.168.127.0"
IP QoS Mode: <None/DiffServ>
Specifies the type of QoS (Quality of Service) tags to apply to all signaling and media packets.
None: no specific QoS tagging is applied.
DiffServ: puts the specified Tag value in the TOS (Type Of Service) field of the IPv4 header or TC (Traffic Class) field of the IPv6 header.
Note: you must restart the system for any changes to take effect.
Default: None
None: no specific QoS tagging is applied.
DiffServ: puts the specified Tag value in the TOS (Type Of Service) field of the IPv4 header or TC (Traffic Class) field of the IPv6 header.
Note: you must restart the system for any changes to take effect.
Default: None
Example:
xConfiguration IP QoS Mode: DiffServ
IP QoS Value: <0..63>
The value to be stamped onto all signaling and media traffic routed through the VCS. Note: you must restart the system for any changes to take effect.
Example:
xConfiguration IP QoS Value: 16
IP Route [1..50] Address: <S: 0, 39>
Specifies an IP address used in conjunction with the Prefix Length to determine the network to which this route applies.
Example:
xConfiguration IP Route 1 Address: "128.168.0.0"
IP Route [1..50] Gateway: <S: 0, 39>
Specifies the IP address of the Gateway for this route.
Example:
xConfiguration IP Route 1 Gateway: "192.168.0.0"
IP Route [1..50] Interface: <Auto/LAN1/LAN2>
Specifies the LAN interface to use for this route. Auto: The VCS will select the most appropriate interface to use.
Default: Auto
Default: Auto
Example:
xConfiguration IP Route 1 Interface: Auto
IP Route [1..50] PrefixLength: <0..128>
Specifies the number of bits of the IP address which must match when determining the network to which this route applies.
Default: 32
Default: 32
Example:
xConfiguration IP Route 1 PrefixLength: 16
IP V6 Gateway: <S: 0, 39>
Specifies the IPv6 gateway of the VCS. Note: you must restart the system for any changes to take effect.
Example:
xConfiguration IP V6 Gateway: "3dda:80bb:6::9:144"