Cisco Cisco Web Security Appliance S690 User Guide

9. memoryUtilizationExceeded    Disabled

10. powerSupplyStatusChange     Enabled

11. resourceConservationMode    Enabled

12. updateFailure               Enabled

13. upstream_proxy_failure      Enabled

Do you want to change any of these settings? [N]>

Enter the System Location string.

[Unknown: Not Yet Configured]> Network Operations Center - west; rack #30, position 3

Enter the System Contact string.

[snmp@localhost]> Joe Administrator, x8888

Current SNMP settings:

Listening on interface “Management” 192.168.1.1 port 161.

SNMP v3: Enabled.

SNMP v1/v2: Enabled, accepting requests from subnet 192.168.1.1.

SNMP v1/v2 Community String: public

Trap target: 10.1.1.29

Location: Network Operations Center - west; rack #30, position 3

System Contact: Joe Administrator, x8888

Choose the operation you want to perform:

- SETUP - Configure SNMP.

[]>

example.com>