Cisco Cisco Web Security Appliance S690 User Guide
B-2
AsyncOS 8.1 for Cisco Web Security User Guide
Appendix B Command Line Interface
Accessing the Command Line Interface
Working with the Command Prompt
The top-level command prompt consists of the fully qualified hostname, followed by the greater than (
>
)
symbol, followed by a space. For example:
When running commands, the CLI requires input from you. When the CLI is expecting input, the prompt
displays the default values enclosed in square brackets (
displays the default values enclosed in square brackets (
[]
) followed by the greater than (
>
) symbol.
When there is no default value, the brackets are empty.
For example:
When there is a default setting, the setting is displayed within the command-prompt brackets. For
example:
example:
When a default setting is shown, typing Return is equivalent to accepting the default:
Command Syntax
When operating in the interactive mode, the CLI command syntax consists of single commands with no
white space and no arguments or parameters. For example:
white space and no arguments or parameters. For example:
Select Lists
When you are presented with multiple choices for input, some commands use numbered lists. Enter the
number of the selection at the prompt.
number of the selection at the prompt.
example.com>
example.com> routeconfig
Choose a routing table:
- MANAGEMENT - Routes for Management Traffic
- DATA - Routes for Data Traffic
[]>
example.com> setgateway
Warning: setting an incorrect default gateway may cause the current connection
to be interrupted when the changes are committed.
Enter new default gateway:
[172.xx.xx.xx]>
example.com> logconfig