Cisco Cisco Web Security Appliance S380 User Guide
3-11
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 3 Deployment
Connecting the Appliance to a WCCP Router
•
Configure the router from exclude redirecting traffic received on a particular
interface.
interface.
•
If the network uses multiple Web Security appliances, you can configure the
router to determine which traffic should be directed to which appliance by
using an access list. You might want to redirect only some of the network
traffic to the appliance if you are evaluating the Web Security appliance.
router to determine which traffic should be directed to which appliance by
using an access list. You might want to redirect only some of the network
traffic to the appliance if you are evaluating the Web Security appliance.
Note
The Web Security appliance does not support using a multicast address in the
WCCP service group. To use multiple routers in a service group, you must specify
the IP address of each router in the service group and configure each router
separately. You cannot register a router to a multicast address.
WCCP service group. To use multiple routers in a service group, you must specify
the IP address of each router in the service group and configure each router
separately. You cannot register a router to a multicast address.
Example WCCP Configurations
This section shows some sample WCCP services defined in the appliance and the
corresponding WCCP configuration you should use to configure the router that
connects to the appliance.
corresponding WCCP configuration you should use to configure the router that
connects to the appliance.
Example 1
Suppose you have the WCCP service shown in