Cisco Cisco Web Security Appliance S360 User Guide
3-20
Cisco AsyncOS for Web User Guide
Chapter 3 Connect, Install, and Configure
Using the P2 Data Interface for Web Proxy Data
Saving and Loading Routing Tables
Step 1
Choose Network > Routes.
•
To save a route table, click Save Route Table and specify where to save the file.
•
To load a saved route table, click Load Route Table, navigate to the file, open it, and submit and
commit your changes.
commit your changes.
Note
When the destination address is on the same subnet as one of the physical network interfaces, AsyncOS
sends data using the network interface with the same subnet. It does not consult the routing tables.
sends data using the network interface with the same subnet. It does not consult the routing tables.
Deleting a Route
Step 1
Choose Network > Routes.
Step 2
Check the checkbox in the Delete column for the appropriate route.
Step 3
Click Delete and confirm.
Step 4
Submit and commit your changes.
Related Topics
•
.
Configuring Transparent Redirection
Specifying a Transparent Redirection Device
Before You Begin
•
Connect the appliance to a Layer-4 switch or a WCCP v2 router.
Step 1
Choose Network > Transparent Redirection.
Step 2
Click Edit Device.
Step 3
Choose the type of device that transparently redirects traffic to the appliance from the Type drop-down
list.
list.
Step 4
Submit and commit your changes.
Step 5
For WCCP v2 devices, complete these additional steps:
a.
Configure the WCCP device using device documentation.
b.
Add a WCCP service.
c.
If IP spoofing is enabled on the appliance, create a second WCCP service.