Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Installation Guide
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco Network Admission Control
Network Modules to the Network
Network Modules to the Network
Revised: May 1, 2008, OL-16674-01
This guide describes how to connect Cisco Network Admission Control (NAC) network modules to your
network. It contains the following sections:
network. It contains the following sections:
•
•
•
•
•
Cisco NAC Network Modules
Cisco NAC network modules allow network administrators to authenticate, authorize, evaluate, and
remediate wired, wireless, and remote users and their machines before allowing users onto a network.
The NAC module identifies whether networked devices, such as laptops, desktops, and corporate assets
are compliant with a network’s security policies, and it addresses vulnerabilities before permitting
access to the network.
remediate wired, wireless, and remote users and their machines before allowing users onto a network.
The NAC module identifies whether networked devices, such as laptops, desktops, and corporate assets
are compliant with a network’s security policies, and it addresses vulnerabilities before permitting
access to the network.
The Cisco NAC network module ships from the factory with the following hardware preinstalled.
Note
See the Cisco NAC network module data sheet for supported Cisco Internet Operating System (IOS)
version information,
version information,
.
Model
Hard Disk
Memory
CompactFlash
NME-NAC-K9
80 GB
512 MB
64 MB