Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Installation Guide
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Connecting Cisco High-Density Extension
Modules to the Network
Modules to the Network
Revised: May 1, 2008, OL-12830-01
This guide describes how to connect Cisco high-density extension modules to your network. It contains
the following sections:
the following sections:
•
•
•
•
•
•
Cisco High-Density Analog and Digital Extension Module for
Voice and Fax
Voice and Fax
The Cisco high-density analog and digital extension module for voice and fax is available as an 8-port
analog voice module (EVM-HD-8FXS/DID). Each port can be configured in Foreign Exchange Station
(FXS) or Direct Inward Dialing (DID) mode through Cisco IOS software commands.
analog voice module (EVM-HD-8FXS/DID). Each port can be configured in Foreign Exchange Station
(FXS) or Direct Inward Dialing (DID) mode through Cisco IOS software commands.
Note
FXS supports on-premises applications only.
Cisco high-density extension modules provide an integrated high-density analog and digital voice
interface for small or medium branch offices. Together with certain expansion modules (see the
interface for small or medium branch offices. Together with certain expansion modules (see the
), the Cisco
high-density extension module provides a maximum of 24 analog voice ports with 8 ports of DID
capability.
capability.