Cisco Cisco Catalyst Inline Power Patch Panel Troubleshooting Guide
Understanding IP Phone Inline Power Provisioning
on the Catalyst 6500/6000 Switch
on the Catalyst 6500/6000 Switch
Document ID: 15256
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Power Management on the Catalyst 6500/6000 Switch
Available Power Supply Capacities
IP Phone Power Consumption
Prerequisites
Requirements
Components Used
Conventions
Power Management on the Catalyst 6500/6000 Switch
Available Power Supply Capacities
IP Phone Power Consumption
Inline Power Line Card (WS−X6348) Power Consumption
Put It All Together
Sample Configurations
Redundant Supervisor Engines and 240 Inline Powered 10/100 Ethernet Ports
Redundant Supervisor Engines, 96 Inline Powered 10/100 Ports, and 48 Nonpowered 10/100 Ports
Troubleshoot Inline Power Issues
Unable to Turn On Third−Party IP Phones
"Partial−deny" Line Card Module Status
Catalyst 6500/6000 Switch show Commands
Syslog Messages
Related Information
Put It All Together
Sample Configurations
Redundant Supervisor Engines and 240 Inline Powered 10/100 Ethernet Ports
Redundant Supervisor Engines, 96 Inline Powered 10/100 Ports, and 48 Nonpowered 10/100 Ports
Troubleshoot Inline Power Issues
Unable to Turn On Third−Party IP Phones
"Partial−deny" Line Card Module Status
Catalyst 6500/6000 Switch show Commands
Syslog Messages
Related Information
Introduction
In order to deploy inline powered phones on the Cisco Catalyst 6500/6000 series products, you need to plan
ahead. You need to choose the correct power facilities and power supplies before you order equipment and
power receptacles in the wiring closet. This document helps you understand the power management system in
the Catalyst 6500/6000 Series Switches.
ahead. You need to choose the correct power facilities and power supplies before you order equipment and
power receptacles in the wiring closet. This document helps you understand the power management system in
the Catalyst 6500/6000 Series Switches.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.