Cisco Cisco 12000 Series 12-Port DS3 Line Card Data Sheet
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 26
Table 1.
Cisco Catalyst 4500 Line-Card Support Options
Line-Card Type
Per-Slot Bandwidth
Chassis Support
Supervisor Support
Cisco Catalyst 4500 47xx
E-Series Line Cards
E-Series Line Cards
48 Gbps
Cisco Catalyst 4503-E, 4506-E,
4507R+E, and 4510R+E
4507R+E, and 4510R+E
Supervisor Engine 8-E,
Supervisor Engine 8L-E,
Supervisor Engine 7-E,
Supervisor Engine 7L-E
Cisco Catalyst 4500 47xx E-
Series Line Cards
Series Line Cards
Note: WS-X4712-SFP+E and WS-
X4748-12X48U+E are not
supported on 4507R-E and
4510R-E
X4748-12X48U+E are not
supported on 4507R-E and
4510R-E
24 Gbps
Cisco Catalyst 4507R-E and
4510R-E
4510R-E
Supervisor Engine 8-E,
Supervisor Engine 7-E,
Supervisor Engine 7L-E
Cisco Catalyst 4500 46xx
E-Series Line Cards
E-Series Line Cards
24 Gbps
Cisco Catalyst 4503-E, 4506-E,
4507R-E, 4507R+E, 4510R-E, and
4510R+E
4507R-E, 4507R+E, 4510R-E, and
4510R+E
1
Supervisor Engine 8-E,
Supervisor Engine 8L-E,
Supervisor Engine 7-E,
Supervisor Engine 7L-E,
Supervisor Engine 6-E,
Supervisor Engine 6L-E
Cisco Catalyst 4500 Series
Classic Line Cards
Classic Line Cards
6 Gbps
Cisco Catalyst 4503, 4506, 4507R,
and 4510R Switches
and 4510R Switches
Cisco Catalyst 4503-E, 4506-E,
4507R-E, 4507R+E, 4510R-E, and
4510R+E Switches
4507R-E, 4507R+E, 4510R-E, and
4510R+E Switches
Supervisor Engine 8-E
2
,
Supervisor Engine 7-E
3
,
Supervisor Engine 7L-E
4
,
Supervisor Engine 6-E,
Supervisor Engine 6L-E
3
,
Supervisor Engine V-10GE
Power over Ethernet on Cisco Catalyst 4500E
The Cisco Catalyst 4500E Series offers line cards, power supplies, and accessories required to deploy and operate
standards-based Power over Ethernet/Power over Ethernet Plus (PoE/PoEP) and Universal POEP (UPOE). PoE
provides power over 100 m of standard unshielded twisted-pair (UTP) cables when an IEEE 802.3af/at-compliant
or Cisco pre-standard powered device is attached to the PoE/PoEP and UPOE line-card port. Instead of requiring
wall power, attached devices such as IP phones, wireless base stations, video cameras, and other IEEE-compliant
appliances can use power provided from the Cisco Catalyst 4500 Series PoE/PoEP and UPOE line cards. For the
regular DC (Direct Current) device that doesn't support PoE/PoEP natively, Cisco Catalyst 4500 Series provides
the UPOE Power Splitter that enables an UPOE port to power a 12V DC power device and another PoE/PoEP
appliance. This capability gives network administrators centralized control over power and eliminates the need to
install outlets in ceilings and other out-of-the-way places where a powered device can be installed. Table 2 shows
the PoE options for Cisco Catalyst 4500 Series line cards.
Although all references to “PoE/PoEP/UPOE,” “inline power,” and “voice” power supplies and line cards are
synonymous, there are currently four versions: Cisco prestandard, IEEE 802.3af compliant, IEEE 802.3at
compliant, and UPOE. Every Cisco Catalyst 4500 Series chassis and PoE power supply supports the IEEE
802.3af/at standard and the Cisco prestandard power implementation, helping ensure backward compatibility with
existing devices powered by Cisco. UPOE line cards require E series chassis. All IEEE 802.3af/at-compliant and
UPOE line cards can distinguish an IEEE or Cisco prestandard powered device from an unpowered network
interface card (NIC), helping ensure power is applied only when an appropriate device is connected.
1
Slots 8-10 on 4510R-E and 4510R+E chassis do not support E-Series line cards with Supervisor Engine 6-E.
2
Supervisor Engine 8-E does not support non-E-Series chassis: 4503, 4506, 4507R, and 4510R.
3
Supervisor Engine 7-E does not support non-E-Series chassis: 4503, 4506, 4507R, and 4510R.
4
Supervisor Engine 7L-E does not support non-E-Series chassis: 4503, 4506, 4507R, and 4510R.