Cisco Cisco 3G Wireless WAN (1xRTT, EVDO Rev A Rel 0) HWIC - Verizon Information Guide
Q&A
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 19
such third-party diagnostics tools are CDMA Air Interface Tester (CAIT) from Qualcomm and
Universal Diagnostic Monitor (UDM) from Spirent.
Universal Diagnostic Monitor (UDM) from Spirent.
Q.
A.
A.
Q.
A.
Q.
A.
A.
Can I access the diagnostic port remotely over the network?
No, not in the current phase. Future plans include making the diagnostic capability available
remotely over the network.
No, not in the current phase. Future plans include making the diagnostic capability available
remotely over the network.
When I issue the command test cell-hwic 0/0/0 dm-port on, it returns an error. What
should I do?
The test commands are hidden commands. You need to enable service internal in the global
configuration mode to issue any test command.
The test commands are hidden commands. You need to enable service internal in the global
configuration mode to issue any test command.
Note: You need to enable service internal before issuing any test commands.
How do I verify my modem lock status?
The following command displays the modem lock state on a 3G HWIC:
The following command displays the modem lock state on a 3G HWIC:
show cellular <slot/wic_slot/port> security
A brief description of the fields for the 3G HWIC Code Division Multiple Access (CDMA)
WWAN module (HWIC-3G-CDMA) follows:
WWAN module (HWIC-3G-CDMA) follows:
●
Modem PIN Security: UNLOCKED
●
Power-Up Lock: DISABLED
●
Field Description
●
Modem PIN Security: If the modem is locked, no calls can be made without unlocking
●
Power-Up Lock: Indicates whether the modem will be locked on power-up
A brief description of the fields for the 3G HWIC Global System for Mobile Communications
module (HWIC-3G-GSM) follows:
module (HWIC-3G-GSM) follows:
Card Holder Verification (CHV1)= DISABLED SIM Status = OK SIM User
Operation Required = None; Number of Retries remaining = 3
Operation Required = None; Number of Retries remaining = 3
●
Field Description
●
Card Holder Verification (CHV1): If ENABLED, access to the SIM is restricted; for the 3G
HWIC, it is always DISABLED
HWIC, it is always DISABLED
●
SIM Status: Indicates whether the SIM is present or removed from the SIM socket
●
SIM User Operation Required: If the SIM is protected (for example, because CHV1 is
enabled), it indicates the type of user operation required
enabled), it indicates the type of user operation required
●
Number of Retried Remaining: Indicates the number of attempts remaining in case the SIM
is locked; if the number of retries becomes zero, the SIM is blocked and becomes an
unusable spare
is locked; if the number of retries becomes zero, the SIM is blocked and becomes an
unusable spare