Cisco Cisco uBR-MC3Gx60V-RPHY Broadband Processing Engine Installation Guide
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco uBR10-MC5X20S/U/H Cable Interface
Line Card Hardware Installation Guide
Line Card Hardware Installation Guide
First Published: September 2003
Last Updated: April, 2012
Last Updated: April, 2012
Document Revision History
Document Revision
Date
Change Summary
OL-2818-04
September 30, 2003 Added information about ESD sensitivity.
OL-2818-05
March 25, 2004
Added universal “U” information to the MC5X20S
documentation.
documentation.
78-17658-01
September 15, 2006 Added universal MC5X20H and UCH2 information.
78-17658-01 Rev. B0
January 2, 2007
Updated the “Feature Overview” section to further
differentiate the MC5X20U and MC5X20H.
differentiate the MC5X20U and MC5X20H.
78-17658-01 Rev. C0
April 9, 2007
Updated the “Feature Overview” section regarding
Carrier-to-Noise Ratio, Signal-to-Noise Ratio, and
Modulation Error Ratio.
Carrier-to-Noise Ratio, Signal-to-Noise Ratio, and
Modulation Error Ratio.
78-17658-01 Rev. D0 June 25, 2007
Updated minimum software requirement for the
MC5X20H to Cisco IOS Release 12.3(17b)BC4.
MC5X20H to Cisco IOS Release 12.3(17b)BC4.
78-17658-02
September 19, 2007 Updated quad-shielded cable colors.
OL-18277-01
October 24, 2008
Added maximum torque specification for installation of
a Cisco uBR10-MC5X20S/U/H card.
a Cisco uBR10-MC5X20S/U/H card.
OL-18277-02
May 15, 2009
Updated for cable assembly change.
OL-18277-03
April 30, 2012
Added SODIMM memory installation and replacement
procedure.
procedure.