Cisco Cisco uBR-MC3Gx60V-RPHY Broadband Processing Engine Data Sheet
Data Sheet
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Cisco 5x20H Broadband Processing Engine for the Cisco
uBR10012 Universal Broadband Router
uBR10012 Universal Broadband Router
The Cisco
®
5x20H Broadband Processing Engine (BPE) for the Cisco uBR10012
Universal Broadband Router combines industry-leading port density, an advanced RF
feature set, next-generation advanced time division multiple access (A-TDMA)
capabilities, and DOCSIS
®
and European DOCSIS (Euro-DOCSIS) support—on a single
line card (Figure 1). The Cisco 5x20H BPE is a performance-enhanced update of the
Cisco 5x20U Broadband Processing Engine with incremental memory and processor
capacity. The line card also supports an extended DOCSIS upstream frequency range of
5 to 55 MHz and downstream support of 70 to 860 MHz for DOCSIS operations in Japan.
The Cisco 5x20H BPE (Figure 1) addresses the expanding service and operational needs
of cable operators. A set of advanced features and a scalable architecture make the
Cisco 5x20H BPE an ideal choice for cable operators facing the challenge of delivering
carrier-class IP-based data, voice, and video services to a growing number of
subscribers. The Cisco 5x20H BPE works with the Cisco 1-Gbps Wideband Shared Port
Adapter (SPA) for the Cisco uBR10012 and Cisco SPA Interface Processor for the 1-
Gbps Wideband Shared Port Adapter.
Figure 1. Cisco 5x20H BPE