Cisco Cisco SM-X Layer 2 3 EtherSwitch Service Module
Cisco SM-X Layer 2/3 EtherSwitch Service Module (ESM) Configuration Guide for Cisco 2900 and Cisco 3900 Series
Upgrading the Cisco SM-X Layer 2/3 ESM Software
20
Cisco SM-X Layer 2/3 EtherSwitch Service Module (ESM) Configuration Guide for Cisco 2900 and Cisco 3900 Series ISRs
Copying Switch Image to ESM Flash Through Host Router
This section describes how to copy the switch image to the ESM flash through the host router.
Summary Steps
1.
copy tftp: flash:
2.
config terminal
3.
tftp-server flash: switch-image
4.
interface gigabitethernet slot/port
5.
ip address ip address/subnet mask
6.
no shutdown
7.
end
8.
service-module gigabitethernet slot/port session
9.
config terminal
10.
interface gigabitethernet slot/port
11.
ip address ip address/subnet mask
12.
copy tftp: flash: