Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-192
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
mls qos srr-queue input bandwidth
mls qos srr-queue input bandwidth
Use the mls qos srr-queue input bandwidth global configuration command to assign shaped round
robin (SRR) weights to an ingress queue. The ratio of the weights is the ratio of the frequency in which
the SRR scheduler dequeues packets from each queue. Use the no form of this command to return to the
default setting.
robin (SRR) weights to an ingress queue. The ratio of the weights is the ratio of the frequency in which
the SRR scheduler dequeues packets from each queue. Use the no form of this command to return to the
default setting.
mls qos srr-queue input bandwidth weight1 weight2
no mls qos srr-queue input bandwidth
Syntax Description
Defaults
Weight1 and weight2 are 4 (1/2 of the bandwidth is equally shared between the two queues).
Command Modes
Global configuration
Command History
Usage Guidelines
SRR services the priority queue for its configured weight as specified by the bandwidth keyword in the
mls qos srr-queue input priority-queue queue-id bandwidth weight global configuration command.
Then SRR shares the remaining bandwidth with both ingress queues and services them as specified by
the weights configured with the mls qos srr-queue input bandwidth weight1 weight2 global
configuration command.
mls qos srr-queue input priority-queue queue-id bandwidth weight global configuration command.
Then SRR shares the remaining bandwidth with both ingress queues and services them as specified by
the weights configured with the mls qos srr-queue input bandwidth weight1 weight2 global
configuration command.
You specify which ingress queue is the priority queue by using the mls qos srr-queue input
priority-queue global configuration command.
priority-queue global configuration command.
Examples
This example shows how to assign the ingress bandwidth for the queues. Priority queueing is disabled,
and the shared bandwidth ratio allocated to queue 1 is 25/(25+75) and to queue 2 is 75/(25+75):
and the shared bandwidth ratio allocated to queue 1 is 25/(25+75) and to queue 2 is 75/(25+75):
Switch(config)# mls qos srr-queue input priority-queue 2 bandwidth 0
Switch(config)# mls qos srr-queue input bandwidth 25 75
In this example, queue 2 has three times the bandwidth of queue 1; queue 2 is serviced three times as
often as queue 1.
often as queue 1.
weight1 weight2
Ratio of weight1 and weight2 determines the ratio of the frequency in which the
SRR scheduler dequeues packets from ingress queues 1 and 2. The range is 1 to
100. Separate each value with a space.
SRR scheduler dequeues packets from ingress queues 1 and 2. The range is 1 to
100. Separate each value with a space.
Release
Modification
12.2(25)SE1
This command was introduced.