Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-260
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
show archive status
show archive status
Use the show archive status privileged EXEC command to display the status of a new image being
downloaded to a switch with the HTTP or the TFTP protocol.
downloaded to a switch with the HTTP or the TFTP protocol.
show archive status [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
If you use the archive download-sw privileged EXEC command to download an image to a TFTP server,
the output of the archive download-sw command shows the status of the download.
the output of the archive download-sw command shows the status of the download.
If you do not have a TFTP server, you can use the embedded device manager to download the image by
using HTTP. The show archive status command shows the progress of the download.
using HTTP. The show archive status command shows the progress of the download.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
are not displayed, but the lines that contain Output are displayed.
Examples
These are examples of output from the show archive status command:
Switch# show archive status
IDLE: No upgrade in progress
Switch# show archive status
LOADING: Upgrade in progress
Switch# show archive status
EXTRACT: Extracting the image
Switch# show archive status
VERIFY: Verifying software
Switch# show archive status
RELOAD: Upgrade completed. Reload pending
Related Commands
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.
Command
Description
Downloads a new image from a TFTP server to the switch.