Manualsbrain.com
  1. Manuals
  2. Brands
  3. Cisco
  4. Cisco Gigabit Ethernet Switch Module (CGESM) for HP
  5. Technical References

Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References

Download
Page of 742
   
2-270
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter  2      CGESM Switch Cisco IOS Commands
show cluster
show cluster
Use the show cluster
 
user EXEC command to display the cluster status and a summary of the cluster to 
which the switch belongs. This command can be entered on the cluster command switch and cluster 
member switches.
show cluster [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
If you enter this command on a switch that is not a cluster member, the error message 
Not a management 
cluster member
 appears.
On a cluster member switch, this command displays the identity of the cluster command switch, the 
switch member number, and the state of its connectivity with the cluster command switch.
On a cluster command switch, this command displays the cluster name and the total number of members. 
It also shows the cluster status and time since the status changed. If redundancy is enabled, it displays 
the primary and secondary command-switch information.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output 
are not displayed, but the lines that contain Output are displayed.
Examples
This is an example of output when the show cluster command is entered on the active cluster command 
switch:
Switch> show cluster
Command switch for cluster “Ajang”
        Total number of members:        7
        Status:                         1 members are unreachable
        Time since last status change:  0 days, 0 hours, 2 minutes
        Redundancy:                     Enabled
                Standby command switch: Member 1
                Standby Group:          Ajang_standby
                Standby Group Number:   110
        Heartbeat interval:             8
        Heartbeat hold-time:            80
        Extended discovery hop count:   3 
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.