Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References

Use the show controllers ethernet-controller privileged EXEC command without keywords to display 
per-interface send and receive statistics read from the hardware. Use with the phy keyword to display 
the interface internal registers or the port-asic keyword to display information about the port ASIC.

show controllers ethernet-controller [interface-id] [phy [detail]] [port-asic {configuration | 

statistics}] [ | {begin | exclude | include} expression]

Privileged EXEC (only supported with the interface-id keywords in user EXEC mode)

This display without keywords provides traffic statistics, basically the RMON statistics for all interfaces 
or for the specified interface.

When you enter the phy or port-asic keywords, the displayed information is useful primarily for Cisco 
technical support representatives troubleshooting the switch. 

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output 
are not displayed, but the lines that contain Output are displayed.

The physical interface (including type, module, and port number).

(Optional) Display the status of the internal registers on the switch physical layer 
device (PHY) for the device or the interface. This display includes the operational 
state of the automatic medium-dependent interface crossover (auto-MDIX) 
feature on an interface.

(Optional) Display details about the PHY internal registers. 

(Optional) Display information about the port ASIC internal registers.

Display port ASIC internal register configuration.

Display port ASIC statistics, including the Rx/Sup Queue and miscellaneous 
statistics.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

12.2(25)SE1

This command was introduced.