Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP Technical References
2-285
Cisco Gigabit Ethernet Switch Module for the HP p-Class BladeSystem Command Reference Guide
380265-002
Chapter 2 CGESM Switch Cisco IOS Commands
show controllers tcam
show controllers tcam
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
ternary content addressable memory (TCAM) in the system and for all TCAM interface ASICs that are
CAM controllers.
ternary content addressable memory (TCAM) in the system and for all TCAM interface ASICs that are
CAM controllers.
show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show controllers tcam command:
Switch# show controllers tcam
------------------------------------------------------------------------
TCAM-0 Registers
------------------------------------------------------------------------
REV: 00B30103
SIZE: 00080040
ID: 00000000
CCR: 00000000_F0000020
RPID0: 00000000_00000000
RPID1: 00000000_00000000
RPID2: 00000000_00000000
RPID3: 00000000_00000000
asic
(Optional) Display port ASIC TCAM information.
number
(Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
from 0 to 15.
detail
(Optional) Display detailed TCAM register information.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)SE1
This command was introduced.